View Wireless Controllers In The Network - NETGEAR ProSafe WC7520 Reference Manual

View Wireless Controllers in the Network

Figure 93.
The Network Controllers screen lets you monitor the stacking configuration of the wireless
controllers in the network.
The following table explains the fields of the Controllers table on the Network Controllers
screen:
Table 40. Network controllers information
Item
Controller IP
Name
Location
Type
Version
Status
Config Status
Config Sync Time
Monitoring the Wireless Network and Components
ProSafe 20-AP Wireless Controller WC7520
Description
The IP address of the wireless controller.
The name of the wireless controller (see
The location of the wireless controller (see
page 58).
The function of the wireless controller in a stack (either Master or Slave).
The firmware version that the wireless controller is running.
The stacking status of the wireless controller (for example, Up or Unreachable).
The firmware configuration status of the wireless controller (for example, Update
Successful).
Note: This field is applicable only to a wireless controller that functions as a slave.
The time that the wireless controller synchronized its firmware.
Note: This field is applicable only to a wireless controller that functions as a slave.
160
Configure General Settings
Configure General Settings
on page 58).
on