NETGEAR WGR614v11 User Manual page 77

N150 Wireless Router WGR614v11 User Manual
Table 1. Wireless Router Status Fields (Continued)
Field
Wireless Port. The following settings apply to the wireless port of the router.
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Wi-Fi Protected Setup
2. Click Connection Status to display the connection status.
Figure 2.
Description
The wireless network name (SSID) being used by the wireless port of
the router. The default is NETGEAR.
The geographic region where the router is being used. It might be
illegal to use the wireless features of the router in some parts of the
world.
Identifies the channel of the wireless port being used. Click the link to
the online document Wireless Networking Basics
the frequencies used on each channel.
Indicates the wireless communication mode:
• Up to 54 Mbps.
• Up to 65 Mbps.
• Up to 150 Mbps.
Indicates whether the radio feature of the router is enabled. If not
enabled, the Wireless LED on the front panel is off.
Indicates whether the router is broadcasting its SSID.
Indicates whether the router's PIN is enabled and whether the router
is configured for Push 'N' Connect (Wi-Fi Protected Setup). For more
information, see Using Push 'N' Connect (Wi-Fi Protected Setup)
page 31.
Chapter 6. Using Network Monitoring Tools
in Appendix A for
on
| 77