NETGEAR WGR614v11 User Manual page 18

- Up to 54 Mbps – Legacy Mode – Maximum speed of up to 54 Mbps for b/g
networks.
- Up to 65 Mbps – Neighbor Friendly Mode – Will not interfere with neighboring
wireless networks.
- Up to 150 Mbps – Performance Mode – Maximum Wireless-N speed up to 150
Mbps.
• The default Security Options is None.
5. Click Apply to save your changes.
Note: If you are configuring the router from a wireless computer and you
change the router's SSID, channel, or security settings, you will lose
your wireless connection when you click Apply. You must then
change the wireless settings of your computer to match the router's
new settings.
6. Select Wireless Settings under Advanced in the main menu of the WGR614v11 router.
Figure 11.
7. Make sure that the Enable Wireless Router Radio, Enable SSID Broadcast, and Enable
WMM check boxes are selected.
8. Click Setup Access List.
9. Make sure that the Turn Access Control On check box is not selected.
10. Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that
you specified in the router, and disable encryption. Check that your computer has a
wireless link and can obtain an IP address by DHCP from the router.
Once your computer has basic wireless connectivity to the router, you can configure the
advanced wireless security functions of the computer and router (for more information about
security and these settings, see
18 | Chapter 1. Configuring Basic Connectivity
N150 Wireless Router WGR614v11 User Manual
Chapter 2 ").