NETGEAR WGR614v11 User Manual page 67

N150 Wireless Router WGR614v11 User Manual
Figure 5.
6. the Port Triggering–Services screen displays.
7. In the Service Name field, enter a descriptive service name.
8. In the Service User field, select Any (the default) to allow this service to be used by any
computer on the Internet. Otherwise, select Single address, and enter the IP address of
one computer to restrict the service to a particular computer.
9. Select the service type, either TCP or UDP.
10. In the Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
11. Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
12. Click Apply. The service appears in the Port Triggering Portmap table.
Figure 6.
Chapter 5. Fine-Tuning Your Network | 67