NETGEAR WGR614v10 Installation Manual

G54 wireless router

Hide thumbs Also See for WGR614v10:

Download this manual See also: Reference Manual, Setup Manual

G54 Wireless Router

WGR614v10

Package Contents

Wireless router

Router stand

Ethernet cable

Power adapter

Attach the stand to the router:

1. Place the stand on a level surface.

2. Slide the router onto the stand.

1. Prepare your modem.

Installation Guide

Unplug your modem. If it has a battery

backup, remove the battery.

Plug in your modem. Put the battery

back in. Then cable the modem to the

Internet port on the router.

Wait for the Wireless LED (

) to light.

Power On/Off

Wireless router

If the NETGEAR genie page does

not display, type http://www.routerlogin.net.

Page 1: Prepare Your Modem
5. Launch a browser. WGR614v10 2. Connect your modem. If the NETGEAR genie page does not display, type http://www.routerlogin.net. Plug in your modem. Put the battery Package Contents back in. Then cable the modem to the Internet port on the router.
Page 2: Troubleshooting
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change this product should be treated and recycled in accordance with the laws of your jurisdiction without notice.