Honeywell HD-JC-010 User Manual page 43

•
Duration
Use left/right keys to highlight duration and then you can input interval
value.
•
Begin touring
Use up/down to highlight tour and then input value.
Now you can click ENTER to begin tour.
• Stop touring
Move cursor to highlight stop and then click ENTER. Now you have stopped
touring
Value ：1
Tour
Tour setup Speed
Add to tour Duration
Remove tour ＞ Remove tour group
Remove
Remove tour
Move cursor to highlight remove tour and then input corresponding value.
Click ENTER to delete current tour.
Tour
＞ Tour group：1
Tour setup
Add to tour point
Remove tour point
Remove tour point
•
Move cursor to highlight tour group and then input
corresponding value.
•
Please click Enter to confirm all the operation below is active
to current tour group.
•
Move cursor to highlight tour point and input corresponding
value (such as 2).
• Now click ENTER to delete.
Tour point：
Honeywell
37