Multi-keyboard link via RS485
You can use the following figure if you are connecting multiple keyboards via RS485 port.
See Figure 5-4.
Figure 5-4 Multi-Keyboard Link via RS485
Multi-converter connection:
The last converter on RS 485 port must be short circuited. (E.g.: open converter). See Figure
5-5.
See the image below, you need to change [1-2] short circuit to [2-3] short circuit.
Note:
Menu serial setup should conform to the device you connected; otherwise keyboard can not
control the device!
Figure 5-5 Connection of Converter
Short
Network Connection
Connect RJ45 port to the network to realize network control and upgrade.
RJ45 port connection
A
B
circuit
......
1 2 3
Honeywell
Other 485 devices
25