Honeywell
ID
485 Add
Dev name
IP ADD
232 ADD
Logout
Click ID key and then click ESC, you can logout current control menu.
Record
Click record button ( )to go to record interface. You can use direction keys to modify
channel name and status. Click ENTER to save modification, click ESC to exit without saving
modification you have done.
PTZ Control and Image Color
In single window display mode, click Fn1, system pops up PTZ and image color menu. Or
you can click P/T in the keyboard to go to DVR control menu.
Tour and Single/Multiple Window Switch.
Note: before click tour key, please make sure your current series DVR supports tour function.
You can click tour key ( ) to begin touring.
are corresponding to :One/four/nine/sixteen window display modes.
、 、 、
You can click numeral key to go to corresponding channel. E.g. you can click numeral 1 to go
to channel one.
For channel number more than two-digit (such as numeral 11), you need work with CAM key.
E.g., you want to go to channel 12 then you input CAM+12+CAM.
Network keyboard backup (USB backup)
Connect network keyboard RJ45 port with DVR. Please refer to 6.2 Network Connection.
30