Operation - Honeywell HD-JC-010 User Manual

Operation

Before operation please note:
X value varies due to different protocols.
Please use up/down to move dome operation menu.
Use left/right to move cursor.
All the operation here is based on DH-SD protocol. There may be some difference for
various protocols.
Now you can click ID key and input ID number to enter current device connection interface.
Current device：Dome
RS485 ADD：1
ID：0
Click MENU, the image is shown as below.
The menu here should work with dome menu.
1. up 5.Previous menu
2. down 6.Next menu
3. Left 7.Confirm
4. Right 8.Exit
Speed
It is to control direction. The value ranges from one to eight. Please
use the number buttons of the keyboard to input value (between 0~8)
and press ENTER
to confirm. (Operation here is only active with key-press. You can use
joystick to control speed directly. )
PTZ movement direction
•
For joystick: up/down/left/right/up left/right down/up right/left down.
•
For keyboard: up/down/left/right
Honeywell
33