Figure 4-1 Control Point - Honeywell HD-JC-010 User Manual

Figure 4-1 Control Point

You can click ENTER to go to the above menu and then input corresponding property to
search.
E.g.: If you want to search a device of ID3. Input ID as 3 and then click ENTER to confirm.
System pops up the following interface, ID 3 is a dome and its RS232 address is 3.
System automatically connects the dome. Now you can use keyboard to control current dome.
Current Dev：Dome
RS232：3
ID：3
Note:
When you use keyboard to control DVR, please click ID and then click ESC to go back to
previous menu.
When you use keyboard to control other device, click ESC to go back to previous menu.
Control point includes the following items.
ID
Machine name
IP address
RS232
Honeywell
21