How To Check Vpn Connections - NETGEAR FVL328 Reference Manual

5. After applying these changes, you will see a table entry like the one below.
Figure 6-10: VPN Policies table
Now all traffic from the range of LAN IP addresses specified on FVL328 A and FVL328 B
will flow over a secure VPN tunnel.

How to Check VPN Connections

You can test connectivity and view VPN status information on the FVL328.
To test connectivity between the Gateway A FVL328 LAN and the Gateway B LAN, follow
1.
these steps:
Using our example, from a computer attached to the FVL328 on LAN A, on a Windows
a.
computer click the Start button on the taskbar and then click Run.
Type
b.
ping -t 172.23.9.1
This will cause a continuous ping to be sent to the LAN interface of Gateway B. After
c.
between several seconds and two minutes, the ping response should change from "timed
out" to "reply."
At this point the connection is established.
d.
Virtual Private Networking
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual
, and then click OK.
M-10144-01
6-21