NETGEAR FVL328 Reference Manual page 167

Click the VPN Settings link on the left side of the Settings management GUI. Click the radio
2.
button of first available VPN leg (all 8 links are available in the example). Click the Edit
button below. This will take you to the VPN Settings – Main Mode Menu.
Figure F-3: Figure 3 – NETGEAR FVS318 VPN Settings (part 1) – Main Mode
– In the Connection Name box, enter in a unique name for the VPN tunnel to be configured
between the NETGEAR devices. For this example we have used toFVL328.
– Enter a Local IPSec Identifier name for the NETGEAR FVS318 Gateway A. This name
must be entered in the other endpoint as Remote IPSec Identifier. In this example we used
14.15.16.17 as the local identifier.
– Enter a Remote IPSec Identifier name for the remote NETGEAR FVL328 Gateway B.
This name must be entered in the other endpoint as Local IPSec Identifier. In this example
we used 22.23.24.25 as the remote identifier.
– Choose a subnet from local address from the Tunnel can be accessed from pull-down
menu.
– Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Local IP
Local LAN start IP Address field.
– Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Local IP
Local LAN finish IP Address field.
– Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Local
LAN IP Subnetmask field.
NETGEAR VPN Configuration FVS318 or FVM318 to FVL328
Model FVL328 ProSafe High-Speed VPN Firewall v2 Reference Manual
M-10144-01
F-3