Test The Vpn Connection - NETGEAR FVL328 Reference Manual

Model FVL328 ProSafe High-Speed VPN Firewall v2 Reference Manual
Figure F-11: NETGEAR FVL328 VPN Policies Menu (Post Configuration)
When the screen returns to the VPN Policies, make sure the Enable check box is selected.
6.
Click the Apply button.

Test the VPN Connection

From a PC behind the NETGEAR FVS318 or FVM318 gateway A attempt to ping the remote
1.
FVL328v2 gateway B LAN Interface address (example address 172.23.9.1)
From a PC behind the FVL328v2 gateway B attempt to ping the remote NETGEAR FVS318
2.
or FVM318 gateway A LAN Interface address (example address 10.5.6.1)
3. Click the Router Status link on the left side of the Settings management GUI. Click the Show
VPN Status button below. This will take you to the IPSec Connection Status Screen. If the
connection is functioning properly, the State fields will show "Estab."
4. Click the Router Status link on the left side of the Settings management GUI. Click the Show
VPN Logs button below. NETGEAR log files should be similar to the example below.
F-10 NETGEAR VPN Configuration FVS318 or FVM318 to FVL328
M-10144-01