NETGEAR FVL328 Reference Manual page 168

Model FVL328 ProSafe High-Speed VPN Firewall v2 Reference Manual
– Choose a subnet from local address from the Tunnel can access pull-down menu.
– Type the starting LAN IP Address of Gateway B (172.23.9.1 in our example) in the Local
IP Remote LAN Start IP Address field.
– Type the finishing LAN IP Address of Gateway B (0.0.0.0 in our example) in the Local IP
Remote LAN Finish IP Address field.
– Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Remote
LAN IP Subnetmask field.
– Type the WAN IP address (22.23.24.25 in our example) of Gateway B in the Remote
WAN IP or FQDN field.
Figure F-4: Figure 4 – NETGEAR FVS318 VPN Settings (part 2) – Main Mode
– From the Secure Association drop-down box, select Main Mode.
– Next to Perfect Forward Secrecy, select the Enabled radio button.
– From the Encryption Protocol drop-down box, select 3DES.
– In the PreShared Key box, type a unique text string to be used as the shared key between
Gateway A and Gateway B. In this example we used hr5xb84l6aa9r6. You must make
sure the key is the same for both gateways.
– In the Key Life box, enter in 3600 seconds.
– In the IKE Life Time, enter 28800 seconds.
– Check the NETBIOS Enable box if you wish to pass NetBIOS traffic over the VPN
tunnel, allowing functions such as Microsoft Network Neighborhood browsing.
F-4 NETGEAR VPN Configuration FVS318 or FVM318 to FVL328
M-10144-01