Reference Manual for the NETGEAR ProSafe VPN Client
This procedure describes linking a remote PC and a LAN. The LAN will connect to the Internet
using an FVL328 with a static IP address. The PC can be directly connected to the Internet through
dialup, cable or DSL modem, or other means, and we will assume it has a dynamically assigned IP
address.
Install the NETGEAR VPN Client Software on the PC.
1.
Note: Before installing the NETGEAR ProSafe VPN Client software, be sure to turn off
any virus protection or firewall software you may be running on your PC.
•
You may need to insert your Windows CD to complete the installation.
•
Reboot your PC after installing the client software.
Configure the Connection Network Settings.
2.
Figure H-4: Security Policy Editor New Connection
Run the Security Policy Editor program and create a VPN Connection.
a.
Figure H-5: Security Policy Editor Options menu
H-8
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01