Specifications - Makita N5900B Instruction Manual

ENGLISH

SPECIFICATIONS

Max. Cutting depth
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
Model
Blade diameter
at 90°
at 45°
at 50°
-1
)
Overall length
Net weight
Safety class
equipment
environmentally
END201-4
impedance equal or less than 0.30 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-5:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
and its
Vibration
The vibration
determined according to EN60745-2-5:
Work mode : cutting chipboard
compatible
Vibration emission (a
ENE028-1
EC-DECLARATION OF CONFORMITY
Model; N5900B
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
ENF002-1
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
000230
ENF100-1
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
2
N5900B
235 mm
85 mm
60 mm
53 mm
4,100
380 mm
7.0 kg
/II
) : 100 dB(A)
pA
) : 111 dB(A)
WA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s or less
h
CE2006
Tomoyasu Kato
Director
ENG102-1
ENG214-1
vector sum)
ENH101-7