Specifications; General Safety Rules - Makita 6411 Instruction Manual

ENGLISH

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise and Vibration
The typical A-weighted noise level determined
according to EN60745-2-1:
Sound pressure level (L
Uncertainty (K)
Model
Steel
Wood
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
) : 82 dB(A)
pA
: 3 dB(A)
6411
10 mm
25 mm
3,000
228 mm
1.2 kg
END201-2
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
[Drilling into metal]
Vibration emission (
Uncertainty (K)
EC-DECLARATION OF CONFORMITY
Model; 6411,6412,6413
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
its
000230
Responsible Manufacturer:
Makita Corporation
ENE032-1
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
ENF002-1
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive
2
6412
10 mm
25 mm
0 - 3,000
228 mm
1.2 kg
/II
2
) : 3.5 m/s
2
: 1.5 m/s
CE2006
Tomoyasu Kato
Director
6413
10 mm
25 mm
0 - 3,000
234 mm
1.2 kg
ENH101-7
GEA001-3