Page 1
INSTRUCTION MANUAL Drill 6409 6409N 6410 6409 6409N 6410 004612 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AC supply. They are double-insulated in accordance with European Makita Corporation responsible Standard and can, therefore, also be used from sockets manufacturer declare that the following Makita without earth wire. machine(s): ENG104-1 Designation of Machine: Drill For European countries only Model No./ Type: 6409,6409N,6410...
Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock.
"OFF" position when released. personal injury. For Model 6409/6409N Use auxiliary handle(s), if supplied with the To start the tool, simply pull the switch trigger. Release tool. Loss of control can cause personal injury.
Installing or removing drill bit CAUTION: For Model 6409 Pressing excessively on the tool will not speed up • 1. Chuck the drilling. In fact, this excessive pressure will only 2.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Keyless drill chuck(For Model 6410) • Chuck key(For Model 6409)
Page 8
Makita Corporation Anjo, Aichi, Japan 884093I229...