Maintenance - Makita 3601B Instruction Manual

1 2
5
1. Hose
2. Joint
3. Vacuum hose
4. Outer diameter ø32 mm
5. Inner diameter ø38 mm

MAINTENANCE

1. Limit mark
1. Screwdriver
2. Rear cover
10
Connect another and of the hose to the vacuum cleaner hose of 38 mm in
006288
inner diameter using a joint.
3
4
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly. Replace when they wear
down to the limit mark. Keep the carbon brushes clean and free to slip in the
holders. Both carbon brushes should be replaced at the same time. Use only
identical carbon brushes.
1
Use a screwdriver to remove the rear cover.
005049
1
2