Makita 3612C Instruction Manual page 12

1. Vacuum head
2. Screws
1. Vacuum head
1
2
1. Support
2. Lock lever
12
Use the vacuum head for dust extraction. Install the vacuum head on the tool
005074
base using the two screws.
1
2
For tool with lock plate
005075
Use the vacuum head for dust extraction. To Install the vacuum head, raise
the lock lever on it. Place the vacuum head on the tool base so that its top will
be caught in the hook on the tool base. Insert the supports on the vacuum
head into the hooks on the front of the tool base.
1
Push down the lock lever onto the tool base.
005076
Then connect a vacuum cleaner to the vacuum head.
005077
To remove the vacuum head, raise the lock lever. Pull the vacuum head out of
the tool base while holding the supports between thumb and finger.