Makita 3612C Instruction Manual page 11

3
1. Bit
2. Guide roller
3. Workpiece
1. Pan head screw
2. Dust cover
1
2
3
1. Collet nut
2. Collet cone
3. Spacer
1. Vacuum head
When cutting, move the tool with the guide roller riding the side of the work-
003701
piece.
1
2
Dust cover (Accessory)
005079
To suit the tool when using in the inverted position with Makita Router Stand.
This accessory prevents sawdust from being drawn through the tool in the
1
inverted position.
It is not recommended for use in the normal position. However, we do recom-
mend its use in the inverted mode.
Fit as shown in the figure.
2
Spacer (Accessory)
005080
When operating the tool in the inverted position with the Makita Router Stand,
use the spacer.
The spacer prevents the router bit from dropping in to the chuck when replac-
ing the bit.
Install the spacer as shown in the figure.
Vacuum head set (Accessory)
For tool without lock plate
005073
1
11