Lan Setup - NETGEAR MBR1515 User Manual

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The router's default LAN IP configuration is:
• LAN IP address. 192.168.0.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and should be suitable for most applications. If your network uses a different IP addressing
scheme, then make those changes in the LAN Setup screen.
Note: If you change the LAN IP address of the router while connected
through the browser, you are disconnected. You have to open a new
connection to the new IP address and log in again.

To change the LAN settings:
1. Select ADVANCED > Setup > LAN Setup to display the following screen:
2. Enter the settings that you want to customize. These settings are described in
Screen Settings
3. Click Apply to save your changes.
LTE Broadband 11n Wireless Router MBR1515
on page 36.
NETGEAR genie ADVANCED Home
35
LAN Setup