Address Reservation - NETGEAR MBR1515 User Manual

Lte broadband 11n wireless router
Hide thumbs Also See for MBR1515:
Table of Contents

Advertisement

You can specify the pool of IP addresses that are assigned by setting the starting IP address
and ending IP address. These addresses should be part of the same IP address subnet as
the router's LAN IP address. Using the default addressing scheme, you should define a
range between 192.168.1.2 and 192.168.1.254, although you might want to save part of the
range for devices with fixed addresses.
The router delivers the following parameters to any LAN device that requests DHCP:
An IP address from the range you have defined
Subnet mask
Gateway IP address (the router's LAN IP address)
Primary DNS server (if you entered a primary DNS address in the Internet Setup screen;
otherwise, the router's LAN IP address)
Secondary DNS server (if you entered a secondary DNS address in the Internet Setup
screen)
To use another device on your network as the DHCP server, or to manually configure the
network settings of all of your computers, clear the Use Router as DHCP Server check box
and click Apply. Otherwise, leave this check box selected. If this service is not enabled and
no other DHCP server is available on your network, you have to set your computers' IP
addresses manually or they are not able to access the router.

Address Reservation

When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the router's DHCP server. Reserved IP
addresses should be assigned to computers or servers that require permanent IP settings.
To reserve an IP address:
1.
In the Address Reservation section of the screen, click the Add button to display the
following screen:
2.
In the IP Address field, type the IP address to assign to the computer or server. (Choose an
IP address from the router's LAN subnet, such as 192.168.1.x.)
3.
Type the MAC address of the computer or server.
Tip:
If the computer is already on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.
4.
Click Apply to enter the reserved address into the table.
LTE Broadband 11n Wireless Router MBR1515
NETGEAR genie ADVANCED Home
37

Advertisement

Table of Contents
loading

Table of Contents