Factory Default Settings - NETGEAR MBR1515 User Manual

Factory Default Settings

Use the Restore Factory Settings button on the bottom of your router to reset all settings to
their original factory default settings. This action is called a hard reset. To perform a hard
reset, press and hold the Restore Factory Settings button for 6 seconds. Your router
returns to the factory configuration settings that are shown in the following table.
Feature
Router User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local LAN IP
network
Subnet mask
(LAN)
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet)
Source MAC filtering
Broadband Internet connection mode
settings
Mobile Internet service provider
broadband
APN
Access Number
PDP type
User name
LTE Broadband 11n Wireless Router MBR1515
Default Behavior
http://192.168.0.1
admin
password
Use default address
1500
AutoSense
www.routerlogin.net
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Always use Mobile Broadband Connection
Verizon
vzwinternet
*99***3#
IPV4V6
None required
Supplemental Information
93