Back Panel - NETGEAR WNR612v3 User Manual

Table 1. Front panel LED descriptions
LED Description
Power/
• Solid green. Power is supplied to the router.
Check
• Blinking green. The router is starting up.
• Off. Power is not supplied to the router.
Wireless
• Blinking green. Data is being transmitted or received over the wireless link.
• Off. The wireless radio is turned off.
Internet
• Solid green. The Internet connection is established.
• Blinking green. There is traffic on the Internet port.
• Off. No Internet connection.
Ethernet
• Solid green. The LAN port has detected an Ethernet link with a device such as a computer.
(1, 2)
• Blinking green. Data is being transmitted or received.
• Off. No link is detected on this port.

Back Panel

The back panel has the connections shown in the following figure.
Ethernet
LAN ports (2)
Figure 3. Router, rear view
See on page 89 for information about restoring factory settings.
Factory Settings
N150 2-Port Wireless Router WNR612v3
Reset
Internet
button
port
Hardware Setup
9
Power connector
Power On/Off