NETGEAR WNR614 Installation Manual

Installation Guide
N300 Wireless Router
Model WNR614

Package Contents

Router Power adapter
Front and Back Views ws
LAN ports 1–4
LAN LEDs 1–4
WiFi LED
Internet port
Internet LED
Power connector
Power LED
WPS/Reset button
1. Prepare your modem.
Unplug the modem's power. If it has
a battery backup, remove the
battery.
DSL or cable
Internet
Modem
Power adapter
4. Power on the router.
Connect the power adapter to the
router, then plug it into an outlet.The
Power LED lights green.
Wait for the WiFi LED to light
green.
2. Connect your modem.
Plug in your modem. Put the battery back in
and turn on your modem.
Wait approximately two minutes until your
modem turns on.
Ethernet cable
(Not included)
Router
5. Connect a computer.
Use an Ethernet cable to connect your
computer to the Ethernet port on the
router.
You can also use WiFi to connect. To
connect with WiFi, use the WiFi
network name and password on the
router label.
3. Cable the modem.
Cable the modem to the router's yellow
Internet port of the router with an
Ethernet cable.
Ethernet cable
(Not included)
6. Launch a web browser.
NETGEAR genie displays.
Follow the genie steps to connect to the
Internet.
If you do not see genie, enter
www.routerlogin.net the address field of the
web browser. When prompted, enter admin
for the user name and password for the
password.