Router Setup Preparation; Use Standard Tcp/Ip Properties For Dhcp; Gather Isp Information; Wireless Devices And Security Settings - NETGEAR WNR612v3 User Manual

Router Setup Preparation

You can set up your router with the NETGEAR genie automatically, or you can use the genie
menus and screens to set up your router manually. Before you start the setup process, get
your ISP information and make sure the computers and devices in the network have the
settings described here.

Use Standard TCP/IP Properties for DHCP

If you set up your computer to use a static IP address, you need to change the settings so
that it uses Dynamic Host Configuration Protocol (DHCP).

Gather ISP Information

If you have DSL broadband service, you might need the following information to set up your
router and to check that your Internet configuration is correct. When your Internet service
starts, your Internet service provider (ISP) typically gives you all the information needed to
connect to the Internet. If you cannot locate this information, ask your ISP to provide it. When
your Internet connection is working, you no longer need to launch the ISP's login program on
your computer to access the Internet. When you start an Internet application, your router
automatically logs you in. Make sure that you have the following information:
The ISP configuration information for your DSL account
•
ISP login name and password
•
Fixed or static IP address settings (special deployment by ISP; this is rare)
•

Wireless Devices and Security Settings

Make sure that the wireless device or computer that you are using supports WPA or WPA2
wireless security, which is the wireless security that the router uses.

Types of Logins and Access

There are separate types of logins that have different purposes. It is important that you
understand the difference so that you know which login to use when.
Router login logs you in to the router interface from NETGEAR genie. See
•
NETGEAR genie After Installation
ISP login logs you in to your Internet service. Your service provider has provided you with
•
this login information in a letter or some other way. If you cannot find this login
information, contact your service provider.
Wireless network key or password. Your router is preset with a unique wireless
•
network name (SSID) and password for wireless access. This information is on the label
on the bottom of your router.
N150 2-Port Wireless Router WNR612v3
on page 14 for details about this login.
Getting Started with NETGEAR genie
12
Use