Changing Wireless Security Settings; Viewing Basic Wireless Settings - NETGEAR WNR2000v2 User Manual

– Passphrase. ______________________________ These characters are case-sensitive.
Enter a word or group of printable characters. When you use WPA-PSK, the other devices
in the network will not connect unless they are also set to WPA-PSK and are configured
with the correct passphrase. Similarly, when you use WPA2-PSK, the other devices in the
network will not connect unless they are also set to WPA2-PSK and are configured with
the correct passphrase.
Use the procedures described in the following sections to specify the WNR2000v2 router. Store
this information in a safe place.

Changing Wireless Security Settings

This section describes the wireless settings that you can view and configure in the Wireless
Settings screen, which you access under Setup in the main menu.

Viewing Basic Wireless Settings

To specify the wireless security settings of your router:
1. Log in to the router as described in
Safeguarding Your Network
NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
"Logging In To Your Wireless Router" on page 1-2.
v1.0, January 2010
2-6