NETGEAR WNR2000v2 User Manual page 34

2. Select Wireless Settings under Setup in the main menu. The Wireless Settings screen
displays.
Figure 2-2
The available settings in this screen are:
• Name (SSID). The SSID is also known as the wireless network name. Enter a value of up to
32 alphanumeric characters. When more than one wireless network is active, different wireless
network names provide a way to separate the traffic. For a wireless device to participate in a
particular wireless network, it must be configured with the SSID for that network. The
WNR2000v2 default SSID is NETGEAR. You can disable this broadcast as described in
"Viewing Advanced Wireless Settings" on page
• Region. This field identifies the region where the WNR2000v2 router can be used. It might
not be legal to operate the wireless features of the wireless router in a region other than one of
those identified in this field.
Note: The region selection feature might not be available in all countries.
Safeguarding Your Network
NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
2-12.
v1.0, January 2010
2-7