Honeywell LYNX User Manual page 48

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Programming Devices
Ready To Arm
Zone Number Operation
Not Used
Ready To Arm
Zone Number Operation
Fault
First Start Zone
Disabled Disabled
Second Start Zone Second Stop Zone
Disabled Disabled
Third Start Zone Third Stop Zone
Disabled Disabled
Editing or Deleting Devices
Ready To Arm
Device 1 Device 2
System Armed
New
Follow Me
Device 3 Device 4
New New
Device 5 Device 6
New New
Edit
Ready To Arm
Name
System Armed
Type
Message to phone 1
Start Zone Type Stop Zone Type
Not Used
Start System Operation Stop System Operation
Armed Stay
Save
5000-100-191-V0
First Stop Zone
Save
5000-100-192-V0
Delete
5000-100-194-V0
01
Action
Send
Not Used
Save
Disarm
5000-100-195-V0
13. Select "Zone Number Operation". The system
toggles between the following options:
None
Trouble
Fault
Alarm
If Trouble, Fault or Alarm is selected, the system
displays several new options:
14. Select a Start Zone or Stop Zone Number from
the list displayed by the system.
15. Select "Save" when programming is complete.
1. At the Device Programming Screen, select the
Device that you wish to edit or delete.
2. To delete the device, select the delete button.
To edit the device select the Edit button and
proceed to step 3.
3. Select the field that you wish to edit and follow
the steps as outlined in the Programming
Devices procedure.
– 48 –