Function Buttons - Honeywell HWB1033S Owner's Manual

3. IMPORTANT SAFETY INSTRUCTIONS
• This appliance is not intended for use by persons
(including children or elderly) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Never clean parts with flammable fluids. The fume
can create a fire hazard or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
this or any other water dispenser. The fumes can create a fire hazard or explosion.
• CAUTION: To prevent accidental tip hazard, the water cooler must be securely anchored
to the floor as shown in section "Installing Your Water Cooler For The First Time"
•
Keep this instructions handy for future reference.

4. FUNCTION BUTTONS

POWER:
Press on the hot or cold switches on the back of the
unit to turn on the hot and cold functions. DO NOT
turn on both switches at the same time. Please refer
to INSTALLING YOUR WATER COOLER FOR THE FIRST
TIME section.
WATER TAPS:
Push in the hot or cold water levers with a cup or
container to dispense the desire water temperature.
To use the hot lever, slide to the right the Safety Lock
located on top of the lever and simultaneously push
down on it.
DRAIN CAP:
Turn counterclockwise to remove the drain cap to drain
the water from the tanks. Turn clockwise to close the
drain cap.
6
ON
OFF
SAFETY
LOCK
OPEN/ABRIR
CLOSE/CERRAR