Function Buttons - Honeywell HWB2052 Series Owner's Manual

3. iMPOrTAnT SAfETy inSTruCTiOnS
• This appliance is not intended for use by persons
(including children or elderly) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Never clean parts with flammable fluids. The fumes
can create a fire hazard or explosion.
• Do not store or use gasoline or any other flammable
vapors and liquids in the vicinity of this or any other
water dispenser. The fumes can create a fire hazard
or explosion.
•
Keep this instructions handy for future reference.

4. funCTiOn BuTTOnS

POWER:
Press on the hot or cold switches on the back of the
unit to turn on the hot and cold functions. DO NOT
turn on both switches at the same time. Please refer
to INSTALLING YOUR WATER COOLER FOR THE FIRST
TIME section.
WATER TAPS:
Push in the hot or cold water levers with a cup or
container to dispense the desire water temperature. To
use the hot lever, press the middle red button (safety
lock) and simultaneously push in the lever.
DRAIN CAP:
Remove the plastic cover using a Phillips screwdriver
(not included). Remove the rubber cover
from the drain pipe to drain the water from the tanks. To
close it place the rubber cover on the drain pipe and
secure the plastic cover back again.
6
I
ON
OR
OFF
SAFETY
LOCK
O