Related Manuals for Honeywell HWTLMT508W
Summary of Contents for Honeywell HWTLMT508W
- Page 1 TABLE TOP WATER DISPENSER (HOT, NORMAL & COLD WATER DISPENSER) USER MANUAL Read and save these instructions before use HWTLMT508W www.honeywellwaterdispensers.com support@honeywellwaterdispensers.com...
-
Page 2: Table Of Contents
CONTENTS Before first use Parts and features Important safety instructions Function buttons Indicator lights Installation guidelines Installing your water dispenser for the first time Instructions for replacing the water bottle Maintenance Technical specification Troubleshooting guide 10-11 Warranty card... -
Page 3: Before First Use
Please write the information here: Date of Purchase:....................... Model Number: HWTLMT508W Color: White ( ) Silver ( ) Black ( ) Serial Number:........................WARNING: BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE, LET IT STAND UPRIGHT FOR APPROXIMATELY 24 HOURS. -
Page 4: Parts And Features
PARTS AND FEATURES 1. Bottle supporter 7. Faucets 2. Indicator light 8. Drip tray 3. Hot water tap 9. Hot switch (red) 4. Normal water tap 10. Cold switch (green) 5. Cold water tap 11. Power cord 6. Safety switch 12. -
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock, or injury when using your appliance, follow the basic precautions: Read and understand all instructions before using the water dispenser. Your water dispenser uses 230V , 50Hz electrical current. Before operating the product remove it from its packing and check if it is in good condition. -
Page 6: Function Buttons
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) This appliance is not intended for use by persons (including children or elderly) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. -
Page 7: Installation Guidelines
INSTALLATION GUIDELINES Remove the exterior and interior packing. With both hands, one under the front panel between the faucets and the other in the handle located in the back, move the unit and place it in the desired location, provided it is a leveled surface. BEFORE CONNECTING THE UNIT TO THE POWER SOURCE, let it stand up for uprights for approximately 24 hours. -
Page 8: Installing Your Water Dispenser For The First Time
INSTALLING YOUR WATER DISPENSER FOR THE FIRST TIME IMPORTANT STEPS BEFORE USING YOUR WATER DISPENSER BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system due to mishandling during delivery. WARNING: Please make sure to turn OFF the unit when the hot and cold water tanks are empty. -
Page 9: Instructions For Replacing The Water Bottle
INSTRUCTIONS FOR REPLACING THE WATER BOTTLE WARNING: Only use a 10 or 20 liter bottle with this water dispenser. WARNING: Make sure the unit is turned off when the hot and cold water tanks are empty. There must be water inside the tanks before turning on any switches. Remove the seal from the bottle lid. -
Page 10: Maintenance
The unit must be stored in an upright position and protected from dust. TECHNICAL SPECIFICATION MODEL NO. VOLTAGE & RATED TOTAL HEATING COOLING HEATING COOLING FREQUENCY POWER POWER POWER CAPACITY CAPACITY HWTLMT508W 230V~, 50Hz 485W 420W 5L/h -≥ 90 C 1L/h -≤ 15... -
Page 11: Troubleshooting Guide
TROUBLESHOOTING GUIDE IF THE UNIT IS NOT WORKING PROPERLY, PLEASE REFER TO THE BELOW TABLE TO SOLVE THE MOST COMMON PROBLEMS: ISSUE POSSIBLE CAUSE SOLUTION No water comes out 1. No water inside the tanks. 1. Make sure the unit is plugged into the from the faucets 2. - Page 12 TROUBLESHOOTING GUIDE (CONTINUED) ISSUE POSSIBLE CAUSE SOLUTION 1. Drip tray is full. 1. Empty the drip tray. Water leaking from 2. The water bottle cap and hose 2. Turn off the cold and hot water the unit connections are loose. switches and dry the unit on the 3.
-
Page 13: Warranty Card
WARRANTY CARD Agile Brands Private Limited, warranties this product to be free from defects in materials and workmanship for 1 year and is valid only in India. This warranty only covers products that are properly installed, properly maintained and appropriately operated by the instructions provided. This limited warranty does not cover any failures or operating difficulties due to normal wear and tear, accident, abuse, misuse, alteration, misapplication, improper installation or improper maintenance. - Page 14 @2023 Agile Sources Limited, Manufactured by: All Rights Reserved Agile Sources Limited Unit 2 Floor 20, Assun Pacific Center, The Honeywell Trademark is 41 Tsun Yip Street, Kwun Tong, used under license from Kowloon, Hong Kong Honeywell International Inc. Honeywell International Inc.