Advertisement
5. Remove the grounds bin from
the grinder and slide the grinder
carefully into the
the rear going forward until the
grinder fits tightly against the front
casting. (See photos #4 & #5).
Photo #4
Photo #5
6. Once the grinder is in place,
plug the grinder cord into the AC
receptacle inside the base of the
, and coil the remain-
ESATTO
TM
ing cord in the space under and
behind the grinder.
(see photo #6).
from
ESATTO
TM
7. Slide the cast metal cover into
place from the rear, taking care
to see that the front "fingers" lock
into correct position.
(see photo #7).
8. Insert the Phillips screw into
the rear of the casting to secure
the casting in place.
5
Photo #6
Photo #7
Advertisement
