Speed Adjustment; Clearing Jammed Staples - Grizzly H5626/7 Instruction Manual

Speed Adjustment

The Model H5627 features staple firing
speeds from .5 to 16 staples per second.
To adjust the staple firing speed:
1. Disconnect the stapler from the air
supply!
Release the speed adjustment lock by
2.
holding the speed adjustment screw
in place with a screwdriver while rotat-
ing the speed adjustment lock counter
clockwise.
3. Rotate the speed adjustment screw
counter clockwise to increase the fir-
ing speed or clockwise to slow the fir-
ing speed (Figure 5).
Speed
Adjustment
Screw
Fast
Slow
Speed
Adjustment
Lock
Figure 5. H5627 speed adjustment screw.
To test fire the stapler push the sta-
4.
pler against a scrap of wood, hold the
trigger down continuously, and move
the stapler across the wood.
When the firing speed has been
5.
adjusted, secure the speed adjust-
ment screw by placing a flat head
screwdriver in the slot and twisting the
speed adjustment lock clockwise until
tight.
-8
-

Clearing Jammed Staples

A jammed staple must be cleared before
using the stapler again.
To clear a jammed staple:
1. Disconnect the stapler from the air
supply!
Open the magazine cover and pull the
2.
magazine all the way back.
3. Remove stick of staples.
Remove jammed staple with needle
4.
nose pliers.
Always disconnect air from stapler
whenever clearing a jammed staple!
H5626/H5627 Upholstery Stapler