Clearing Jammed Nails - Grizzly H7826 Owner's Manual

Clearing Jammed
Nails
This nailer may accidentally fire if
you work on it without disconnecting
it from the air supply. Always discon-
nect air from nailer whenever clearing
a jammed nail!
A jammed nail must be cleared before
using the nailer again.
To clear a jammed nail from the dis-
charge area:
1. DISCONNECT NAILER FROM THE
AIR SUPPLY!
2. Pull the magazine loader all the way
back and remove the nail stick.
3. The jammed nail should now be vis-
ible; use needle nose pliers to remove
it from the discharge area.
—If the nail cannot be removed, con-
tinue to Step 4.
—Continue to Step 6, when the
jammed nail is removed.
Model H7826 Flooring Nailer
4. Remove the cap screws shown in
Figure 6 that secure the magazine.
Figure 6. Cap screws securing the
magazine.
5. Remove the jammed nail (Figure 7)
with a pair of needle nose pliers, then
replace the magazine.
Figure 7. Jammed nail in discharge area.
6. Load a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
-11
-