Table of Contents
Advertisement
Foreword
We are proud to offer the Grizzly Model
H7826 Flooring Nailer. This model is part
of a growing Grizzly family of fine pneu-
matic tools. When used according to the
guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of Grizzly's commit-
ment to customer satisfaction.
It is our pleasure to provide this manual
with the Model H7826 Flooring Nailer. It
was written to encourage safety consid-
erations and guide you through general
operating procedures and maintenance.
The specifications, details, and photo-
graphs in this manual represent the Model
H7826 as supplied when the manual was
prepared. However, owing to Grizzly's pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Machine Data
Nail Length .......................................1
Magazine Capacity ...................... 100 Nails
Air Inlet ...........................................
Flooring Nailer Weight ...................11
Hammer Weight ...............................2
Operating Pressure .................. 70-110 PSI
Model H7826 Flooring Nailer
INTRODUCTION
⁄
"-2"
1
2
⁄
" NPT
3
8
⁄
lbs.
1
3
⁄
lbs.
1
2
Contact Information
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.
-1
-
Advertisement
Table of Contents
