Section 4: Operations; Operation Safety; Basic Controls - Grizzly G3358 Owner's Manual

section 4: operations

operation safety

to reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
damage to your eyes could result from using
this machine without proper protective gear.
always wear safety glasses or a face shield
when operating this machine.
loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
NoTICE
if you have never used this type of machine
or equipment before, We strongly rec-
ommend that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. regardless of the con-
tent in this section, grizzly industrial will
not be held liable for accidents caused by
lack of training.
g3358 Milling/drilling Machine
use the descriptions and figures below to become
familiar with the basic controls of your machine.
fWd/off/rev switch: Controls the direction of
the spindle and turns main power to the machine
oN/off.
this entire
depth stop: stops the spindle travel at a pre-
determined depth.
spindle lock: locks the spindle in position verti-
cally.
FWd/oFF/reV switch
depth stop
spindle lock

basic controls

figure 16. head controls.
-19-