i
a. directional switch—turns the machine
on and changes directional rotation of spin-
dle from clockwise to counterclockwise.
b. micro-adjustment handwheel—Controls
depth of cut by 0.001" increments.
c. depth stop—Allows you to make repeated
cuts to the same depth.
d. 3" face mill—performs facing cuts on large
surfaces.
e. longitudinal stops—limits table travel for
repeatable positioning.
g3358 Milling/drilling Machine
identification
A
B
C
d
e
F
figure 1. Model g3358 identification.
g
h
e
i
J
f.
cast iron base—Keeps vibrations to a
minimum, ensuring precision.
g. micro-adjustment lock Knob—Must be
tightened to engage the Micro-Adjustment
handwheel.
h. Quill downfeed levers—Control coarse
vertical movement of the quill.
i.
longitudinal (X-axis) handwheel—Allow
longitudinal table travel.
J.
cross (y-axis) handwheel—Allow cross
table travel.
-3-