Section 4: Operations; Operation Safety; Control Panel - Grizzly G0484 Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-16-

Control Panel

A. Power Lamp: Glows when the master power
switch is ON.
B. Headstock Up Button: Controls the head-
stock motor so the headstock is powerfed
upwards.
C. Headstock Down Button: Controls the
headstock motor so the headstock is power-
fed downwards.
D. Emergency Stop Button: Stops the mill/
drill. Rotate the button clockwise until it pops
back out to reset it.
E. Master Power Switch: Toggles main power
to the machine.
F. Spindle Rotation Dial: Changes spindle
rotation direction for milling/drilling operations.
Spindle rotation must always be stopped
before making direction changes.
A
B
C
D
Figure 11. Control panel.
G0484 Gear Head Mill/Drill
F
E