The Audit Certificate List - Cisco Telepresence MX300 Administrator's Manual

Cisco TelePresence MX Series
AdministrAtor guide
Table of contents Introduction
The audit certificate list
If you want to use the ExternalSecure audit logging mode,
you must upload a list of trusted audit certificates to the video
conference system. This list covers all audit servers that your
system shall trust.
In the ExternalSecure audit logging mode audit logging
information will only be sent to entities holding a valid audit
certificate.
NOTE: You should always upload the audit certificate list
before enabling secure audit logging.
About audit logging
Audit logging records all sign in activity and configuration
changes on the system.
Audit logging is disabled by default. You can enable audit
logging using the on-screen menu or the web interface.
D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
1. Upload the audit certificate list
To install the audit certificate, you will
need:
• Audit list file ( .PEM format)
Contact your system administrator to
obtain the required file.
i. Press Browse... and locate the file with
the audit list file (.PEM format).
ii. Press Upload to upload the certificate
to your system.
2. Enable secure audit logging
When you have uploaded the audit
certificate list you must enable secure
audit logging:
i. Navigate to Advanced Configuration
> Security > Audit > Server
the IP address and Port number of the
audit server.
ii. Navigate to Advanced Configuration >
Security > Audit > Logging > Mode
select ExternalSecure.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Appendices
and enter
and
26
www.cisco.com