Starting The Web Interface - Cisco Telepresence MX300 Administrator's Manual

Cisco TelePresence MX Series
AdministrAtor guide
Table of contents Introduction
Starting the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In the following you will find information how to use the web
interface for system configuration and maintenance.
D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
1. Connect to the video system
Open a web browser and enter the
IP address of the video system in the
address bar.
To find the IP address (IPv4 or
IPv6), tap More > Settings > System
Information on a Touch controller; or
navigate to Home > Settings > System
information when using a remote
control and the on-screen menu.
Appendices
Enter the user name and password for
your video system and click
The system is delivered with a default
user named
NOTE:
11
2. Sign in
Sign In.
admin
with no password
(i.e. leave the Password field blank
when signing in for the first time).
We strongly recommend that
you set a password for the admin
user to restrict access to system
configuration, see the next page.
Sign out
Click on your user
name and select
Sign out from the
drop down menu.
www.cisco.com