Advertisement
Before doing any repairs, disconnect the
appliance from the input power.
6) COMPONENTS SUBSTITUTION
To replace the components lodged in the internal
part, is necessary to remove the appliance from the
furniture, overturn it, loosen the screws and take off
the bottom.
After these actions it is possible to work on the
plates, commutators, clamps and input cable.
POWER OF ELECTRICAL COMPONENTS DENOMINATIONS W
Denominations
Heating element Ø mm 145 radiant and halogen
Heating element Ø mm 180 radiant
Heating element Ø mm 180 halogen
TYPE AND SECTION OF THE POWER CABLES 4 HEATING ELEMENTS
Cable type
Rubber
H05 RR-F
TYPE AND SECTION OF THE POWER CABLES 2 HEATING ELEMENTS
Cable type
Rubber
H05 RR-F
MAINTENANCE
In case of substitution of the input cable, the
installer must keep the "earth" conductor longer
than "live" ones, and must respect the cautions in
paragraph "electrical connection".
To reassemble the appliance repeat the process
inversely.
7) TECHNICAL CHARACTERISTICS
OF THE ELECTRICAL COMPONENTS
To facilitate the job of the installer we present a
scheme with the characteristics of the components.
Single phase power
230 - 240 V~
Single phase power 230 - 240 V~
9
W
1200
1700
1800
2
3 X 2.5 mm
2
3 X 1.5 mm
Advertisement
