Advertisement
1) ELECTRIC HOB
The hot plates are equipped with 4 radiant heating
elements with different powers and diameters.
Cooking zones are easily identifiable thanks to the
circles (see illustration in description) on the top;
relative powers are listed in the scheme n.1.
A scheme has been silk-screened onto the front
panel indicating which cooking zone the knobs refers
to (fig. 1 - 3).
In some particular models the scheme annexes a
light indicator that turns on when the cooking zone
temperature is above 60° C (fig. 1-3).
The indicator will turn off only when the temperature
of the cooking zone will be below the value: this is
the reason why we call it residual heat indicator.
Some other models have only one indicator (see
description paragraph).
61040 K MODEL
FIG. 1
USE
Connection of electric heating elements
Heating elements are controlled by energy
regulators with 12 positions or by commutators with
6 positions that permit a wide range of different
temperatures. In Scheme 1, by way of information,
we give instructions to obtain different cooking
levels.
To connect the heating elements it is necessary to
turn the relative knob clockwise or anticlockwise.
Indicator light 6 shows the connection of one or
more heating elements.
How to use the cooking zones
Heating takes place only in the inside part of the
circles drawn on the special glass. The circles have
to be completely covered by the pots.
61040 K MODEL
FIG. 2
3
31050 K MODEL
FIG. 3
Advertisement
