Sony DXC-D35 Service Manual page 66

2-2. Removal/Attachment of Cabinet
9. Remove the two screws of the front unit assembly
shown in the figure and the two screws of the rear
plate, and then remove the top chassis.
Screw
(B3 x 10)
Screw
(B3 x 10)
10. To reattach, perform in the reverse order of steps 1 to
9.
2-4
m
. Be sure to route the harnesses as shown in the figure
. When reinstalling the VA, PR, IF and ES boards, use
. When reconnecting the flexible card wires, refer to
Screw (K3 x 6)
Screw
(K3 x 6)
Rear plate
Front unit assembly
when reattaching the MB board.
care to insert securely the connectors on each board to
the connectors of the MB board as far as they will go.
Section 2-11.
MB board
Diagram of harness routing on the MB board
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1