Viewfinder Advanced Menu - Sony DXC-D35 Service Manual

Viewfinder Advanced Menu

Item Settings
VF TALLY 1: Uses only the upper
Selects whether or not to use REC/TALLY indicator.
more than one REC/TALLY 2 (normal value): Uses
indicators in the viewfinder two REC/TALLY indicators.
(displayed only when the
DXF-701/701CE/701WS/
701WSCE/801/801CE
viewfinder is attached).
VF PLAY Y (normal value): Y signal
Selects the video signal
VBS: Composite video
displayed in the viewfinder
signal
during playback of the DSR-
1/1P (displayed only when
the DSR-1/1P is connected)
LENS SEL 1 (normal value), 2, 3, 4
Selects the types of the lens. For details, see "Designating
the lens" on page 90.
Advanced menu page 5
Item
Settings
SS IND a) 3SEC: Displays shutter
Selects the mode for setting for three seconds only
showing the shutter setting when the setting has been
when displaying the normal changed.
indications. ALWAYS (normal value):
Displays the shutter setting at
all times.
LL IND a) ON (normal value):
Selects whether or not to Displays.
show the LOW LIGHT OFF: Not display.
indication on the normal
indications when inadequate
lighting is detected.
MIC IND a) ON (normal value):
Selects whether or not to Displays.
show the camera OFF: Not display.
microphone output
indication on the normal
indications.
IRIS IND a) ON (normal value):
Selects whether or not to Displays.
show the lens's F-stop value OFF: Not display.
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
66
Chapter 4 Viewfinder Screen Indications and Menus
Item Settings
GAIN IND a) ON (normal value): Always
Selects whether or not to displays.
always show the gain OFF: displays for two
setting indication on the seconds only when the
normal indications. setting has been changed.
FILTER IND a) ON (normal value): Always
Selects whether or not to displays.
always show the FILTER OFF: Displays for two
knob setting indication on seconds only when the
the normal indications. setting has been changed.
The FILTER knob setting
indicator is always displayed
when in EZ mode.
WHITE IND a) ON (normal value): Displays.
Selects whether or not to
OFF: Not display.
show the setting of the white
balance switch.
a)
SKIN IND ON (normal value): Displays.
Selects whether or not to OFF: Not display.
show the setting for skin
detail correction.
a) When the viewfinder's DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
Advanced menu page 6
Item Settings
a)
AUDIO IND ON (normal value):
Selects whether or not to Displays.
show the audio level OFF: Not display.
indication on the normal
indications (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
TAPE IND a) ON (normal value):
Selects whether or not to Displays.
show the VTR's remaining OFF: Not display.
tape indication on the normal
indications. (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
a) When the viewfinder's DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
Item Settings
TC IND a) ON (normal value):
Selects whether or not to Displays.
show the time data indication OFF: Not display.
on the normal indications
(valid only when the DSR-1/
1P or PVV-3/3P is
connected).
ID IND ON (normal value):
Selects whether or not to Displays.
display the camera ID when OFF: Not display.
displaying color bars.
ID SET See "To set the camera ID"
Sets the camera ID (up to below.
eight characters, including
alphanumerics, symbols,
and spaces).
a) When the viewfinder's DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
To set the camera ID
1
Press the MENU/STATUS switch to move the
cursor to ID SET.
The cursor ( ) changes to the text entry arrow ( ).
Current camera ID
2
Press the MENU/STATUS switch to move the text
entry arrow.
Press the MENU/STATUS switch upward to move
the cursor to the right or downward to move it to
the left.
3
Press the UP/ON button or DOWN/OFF button to
enter the desired characters.
The displayed character changes each time the UP/
ON button is pressed. It changes in reverse order
each time the DOWN/OFF button is pressed.
4
Return to step 2 and repeat the text entry
procedure.
5
When you have finished entering the text, move
the cursor to the parenthesis position.
This clears the displayed menu and returns to the
normal indications.
Advanced menu page 7
a) At shipping, the EZ MODE is set to STD.
Item Settings
EZ MODE STD (normal value):
When the EZ MODE button Changes settings to
has been set to EZ mode standard settings.
ON, this selects whether or CUSTOM: Changes only
not to change the settings of some settings to standard
other switches and menus to settings.
the standard settings. (The For details of the settings
EZ mode function cannot be when STD or CUSTOM is
used during remote specified, see "EZ mode
operation.) settings" on next page.
A.IRIS-AGC F1.8, F 2.8 (normal value),
Selects auto iris adjustment F4, F5.6
which sets an F-stop value
that can be switched to AGC
(displayed only when the EZ
MODE is set to CUSTOM).
A.IRIS-AE F5.6 , F8, F11, F16 (normal
Selects auto iris adjustment value)
which sets an F-stop value
that can be switched to AE
(displayed only when the EZ
MODE is set to CUSTOM).
AGC LIMIT 0 dB, 3 dB, 6 dB, 9 dB, 12
Sets an upper limit value for dB (normal value)
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).
67
Chapter 4 Viewfinder Screen Indications and Menus