Sony DXC-D35 Service Manual page 62

ClipLink Operation Flow
Time codes recorded for Mark IN/OUT points
There is a gap between actual time codes and Mark IN/
OUT time codes recorded in the cassette memory, as
shown in the figure below. The frame digit is
incremented at each Mark IN point and is decremented
at each Mark OUT point.
Mark IN
(or Rec IN)
Actual time code 12:23:15:10
Frame digit
incremented
Time code
12:23:16
recorded in the
cassette memory
(The Index
Picture is the
image around
12:23:15:10.)
Recording capacity for Mark IN/OUT time
codes and Cue point time codes
When in Mark mode, up to 198 pairs of Mark IN and
Mark OUT points can be recorded (if using a cassette
with 16 Kbits of cassette memory).
When in Cue mode, up to 396 time codes points
(including all cue point time codes and all Mark (Rec)
IN and Mark (Rec) OUT time codes) can be recorded
(if using a cassette with 16 Kbits of cassette memory).
106
Appendix
Mark OUT
Cue (or Rec OUT)
12:34:20:20 12:39:24:23
Frame digit
decremented
Cue
12:34:20:20 12:39:24