Viewfinder Basic Menu - Sony DXC-D35 Service Manual

Viewfinder Basic Menu

Item Settings
MARKER ON (normal value), OFF
Sets MARKER display ON/OFF. MARKER is displayed
when this setting is ON
and is not displayed
when it is OFF.
When the setting is ON,
go to Advanced Menu 4
to select the type of
marker (see page 65) .
DUR TIME 00:00 to 59:59 (minute
Sets the recording time
to second)
Setting the recoriding time
See "Setting the
before shooting helps you with recording time in
making scenes of equal
seconds" below.
duration.
When shooting with displaying
the recording time of the current
cut in the viewfinder (with the
REC TIME switch set to DUR),
the recording time indication
flashes to remind you that the
recording time has passed.
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the UP/ON
button or DOWN/OFF button.
A value of seconds is displayed under "SS".
60
Chapter 4 Viewfinder Screen Indications and Menus
Basic menu page 6
The following display is shown when the DSR-1/1P is
connected.
Item Settings
MARK/CUE MARK (normal value), CUE
Selects MARK See "Using the ClipLink Function"
mode or CUE mode (page 46).
CHG REEL NO See "To set the cassette name/
Sets the cassette number" below.
name/number
To set the cassette name/number (when using
DSR-1/1P)
1
Connect the DSR-1/1P and load a cassette.
2
Press the MENU/STATUS switch to move the
cursor to CHG REEL NO, then press the UP/ON
button.
The cursor ( ) changes to the text entry arrow ( )
and the current cassette name/number is displayed.
("NO TAPE" is displayed if you neglected to load
a cassette.)
Current cassette
name/number
3
Press the MENU/STATUS switch to move the text
entry arrow.
Press the MENU/STATUS switch upward to move
the cursor to the right or downward to move it to
the left.
The character cycles through the following
sequence.
ABCDEFGHIJKLMNOPQRSTUVWXYZ?;x/0123456789: - .,
(Space)
4
Press the UP/ON button or DOWN/OFF button to
enter the desired characters.
The displayed character changes each time the UP/
ON button is pressed. It changes in reverse order
each time the DOWN/OFF button is pressed.
5
Return to step 2 and repeat the text entry
procedure.
6
After completing text entry, move the text entry
cursor to the parenthesis position.
The display changes as follows.
7
Check your cassette name/number setting, and
press the UP/ON button if no more changes are
required. (To make changes or to abort the
procedure for this setting, return to step 2.)
This writes the new cassette name/number to the
cassette memory, after which the display changes
as follows.
Basic menu pages 7 and 8
You can create a title of up to four lines, each of
twelve alphanumeric or punctuation characters, and
then save it. It is then possible to record the title over
the picture while shooting.
Entering the title (page 7)
1
Press the MENU/STATUS switch as necessary to
display basic menu page 7 (title setting display) in
the viewfinder.
If a title is already present, it appears on this
screen. To delete the displayed title, press the UP/
ON and DOWN/OFF buttons simultaneously.
2
Press the UP/ON button.
This brings up the cursor on the screen (flashing),
and switches to title editing mode.
Initial cursor position
3
Press the DOWN/OFF button to move the cursor to
the position where you wish to insert a character.
To move the cursor back
With the DOWN/OFF button held down, press the
UP/ON button.
(continued)
61
Chapter 4 Viewfinder Screen Indications and Menus