Honeywell GasAlert Extreme User Manual page 20

GasAlert Extreme
User Manual
5. Sensor Test: The detector tests the sensor. If the sensor test
fails, the detector beeps slowly, the LEDs flash slowly, and
ALARM flashes.
If the sensor test passes, the self-test continues.
6. Gas Type: The LCD displays the type of gas the detector is
manufactured to monitor.
Refer to Table 1 for the type of gases monitored.
If the battery is low, the LCD displays the low battery icon and
the self-test continues.
10
7. TWA Alarm Setpoint: The LCD displays the TWA alarm set-
point.
The TWA alarm setpoint screen does not apply to O
8. STEL Alarm Setpoint: The LCD displays the STEL alarm set-
point.
The STEL alarm setpoint screen does not apply to O
tors.
Note
detectors.
2
Note
detec-
2