Data Transfer Option - Honeywell GasAlert Extreme User Manual

GasAlert Extreme
User Manual
D E
4. Press or to scroll to another user option or press
exit and return to normal operation.
If a datalogging sample rate value is not selected or confirmed
C
by pressing within 10 seconds, NO displays and the LCD
displays the EXIT screen.

Data Transfer Option

The data transfer (SEND) option transfers the datalog/event log informa-
tion from the detector to a PC.
An IR DataLink (or other BW accessory) is required to transfer
the data from the detector to a PC.
To transfer data, complete the following:
1. Connect the IR DataLink (or other BW accessory) to the detector
and the PC.
Refer to the IR DataLink Instruction Sheet.
2. From the EXIT screen of the user options menu, press
to scroll to the SEND option.
24
Note
Note
C
to 3. Press
option screens.
4. Select one of the following options to transfer data.
5. When the data transfer is complete, the detector beeps and
vibrates, and the LEDs flash. The LCD displays the EXIT screen.
D E
or
C
to select the option and to access the data transfer
D E
Press or
event (EVNT) option. Press
automatically transfer all events.
D E
Press or
last (LAST) option. Press
automatically send all of the data-
logs since the last datalog down-
load.
D E
Press or
(ALL) option. Press
matically send all of the datalogs
that are saved on the detector.
to scroll to the
C
to
to scroll to the
C
to
to scroll to the all
C
to auto-